Common Mode Inductor Core

Performance characteristics : high permeability, high saturation magnetic induction, low loss.

Through transverse magnetic heat treatment iron-based nanocrystalline core has high saturation and magnetic induction intensity (1.25 T, relative to the ferrite), high permeability (u= 30000-100000, relative to the ferrite u = 10000), low remanence Br value, usually rectangular than Br/Bm < 0.3 (relative to the without transverse magnetic heat treatment of iron-based nanocrystalline core Br/Bm > 0.6), low iron loss (relative to the ferrite, transverse magnetic heat treatment of iron-based nanocrystalline core, traditional silicon steel sheet material).

Through transverse magnetic treatment iron-based nanocrystalline, because of the high saturation magnetic induction intensity of Bs, low remanence Br, so has great 6. B, can be used in the single ended topology circuit for transformer.When used in the circuit of push-pull, half-bridge and full-bridge topology, it will also avoid the saturation risk of the transformer due to the dc bias tape because the Br value is low

Due to the use of iron-based nanocrystalline strip winding common-mode inductor core has high permeability, high saturation magnetic induction intensity, low loss, so need only a few laps common-mode inductor with high inductance, lower copper loss, small size

The common mode inductor magnetic core is mainly used in the middle and high frequency switching power supply as transformer core, instead of ferrite and silicon steel core, such as electroplating power and welding power supply .

High frequency low loss, rapid quenching soft magnetism crystalline alloy.

Characteristics:Made of Fe-based amorphous soft magnetic material, high saturation magnetic flux density, wide range of constant, low loss at high frequency, low leakage magnetic pole, frequency characteristics, excellent temperature characteristics.

Main applications:Car audio filter inductance, differential-made inductors for EMC anti-jamming, charging circuit output smoothing filter and energy storage inductors.

Size and performance can be customerized

1.Which countries you are selling to ?

We export our cores to Germany, Italy, France, UK, Turkey, Spain, Sweden, Poland, Czech, Slovakia, Korea, Thailand, Malaysia, Indonesia, Vietnam, USA, Columbia, Brazil, Australia etc.

2.What is your payment terms?

We accept TT and L/C.

Advantages

1.We produce amorphous and nanocrystalline ribbons as raw materials for cores, so we can adjust the formulation of raw materials according to application and performance requirements

2.more then 13 years experiences in magnetic cores manufacturing and exporting.

3.Various types magnetic materials available: Silion Steels, Nanocrystalline ribbon, Amorphous Ribbon, Mumetal

4.professional customized service,various types of cores ,give you the best solution

1. Tell us what you need

As every application has its own characteristics and requirements.
We provide customized services according to your application

Just tell us your design concept and basic parameters

We design & produce goods based on clients' specifications & drawing:

1.Bare core size, Size finished

2.Al requirement @ different frequency

2. Get solution & quote

We will work on the best solution and provide primarily specification& quote for your review.

3. Sample production and mass production

We will start mass production after customer confirmation and validation of samples.

Hot Tags: common mode inductor core, China common mode inductor core manufacturers, suppliers, factory, ei transformer laminations, nanocrystalline cores for leakage circuit breakers, High Frequency Power Transformer core, nanocrystalline common mode cores, Measurement Transformer Core, transformer ee core