
NANO-CRYSTALLINE COMMON MODE CHOKE CORE
Nanocrystaline ribbon is the soft magnetic alloy material with superfine grain size(~10nm) which is formed by the Fe、Si、 B、Cu、Nb and other elements,and gets through specfic annealing process at cooling rate of 10 ℃/s.6
Nanocrystaline ribbon is the soft magnetic alloy material with superfine grain size(~10nm) which is formed by the Fe,Si, B,Cu,Nb and other elements,and gets through specfic annealing process at cooling rate of 10 ℃/s.6
The outstanding feature of this new metalic material is short manufacturing process, forming by one-step and saving energy consumption.It has the feature of high saturation magnetization (Bs) of Fe- based crystalline alloy and high permeablty and low loss of Co-based crystalline alloy,so it can satisty the performance requirements of high frequency and low loss. This material is mainly applied in the production of high-end common mode chokes, high frequency transformer, all kinds of current transformers and high-end magnetic ampliier, etc. Related cores and components are mainly used in new energy vehicle power management system, drive system, wireless charging module for mobile phone, rail transit, the precipitation power, grid- connected photovoltaic inverter, digital electronic products, and smart meters in the power grid to meet the requirement of high frequency, large current, miniaturization and energy-saving.
NANO-CRYSTALLINE COMMON MODE CHOKE CORE
Application
Inverter circuit
Frequency converter
UPS
Switching Mode Power
EMC filter

Characteristic
High saturate induction - reduce volume of CMC
Excellent impedance frequency characteristic
Outstanding ability to resist unbalanced current

Excellent temperature stability
SQ COMMON MODE SERIES CORE
Characteristic
Better EMI suppression effect
Flat wire vertical winding scheme can be adopted, with extremely low distributed capacitance and better heat dissipation effect
Avoiding performance degradation caused by stress on the core
Working principle of common mode inductor
When the normal current flows through the common mode inductor in the circuit, the current will produce reverse magnetic field in the same phase winding inductor coil to cancel each other. At this time, the inductance is approximately zero and the impedance to the input current is very small.
When the coil passes through the coil, the common mode current wil be attenuated, and the coil will produce a common mode current.
Therefore, the larger the impedance of the common mode inductor, the better the common mode filtering effect. In a certain frequency range, nanocrystalline materials have higher impedance than traditional materials ferrite. Compared with ferrite, the initial permeability of nanocrystals is much higher, so the volume can be smaller, the winding coils are less, the distributed capacitance is smaller, and the impedance characteristics are better.
|
Sunbow Part No. |
Core dimensions |
Finished core dimensions |
Effictive cross section |
Mean path length |
Permeability(at 10KHZ) |
AL Nominal Value** |
||
|
OD×ID×HT |
OD×ID×HT |
AFe |
lFe |
Interval value |
Refere nce value |
10kHz |
100kHz |
|
|
mm |
mm |
cm2 |
cm |
μH |
μH |
|||
|
SW-CM120805 |
Φ12×8×5 |
Φ14.3×6.8×6.9 |
0.08 |
3.1 |
50000-120000 |
90000 |
28 |
6.7 |
|
SW-CM151005 |
Φ15×10×5 |
Φ17.1×8.3×7.1 |
0.09 |
3.9 |
50000-120000 |
91000 |
29 |
6.8 |
|
SW-CM201208 |
Φ20×12.5×8 |
Φ22.6×10.3×10.2 |
0.24 |
5.1 |
50000-120000 |
97000 |
56 |
14 |
|
SW-CM201210 |
Φ20×12×10 |
Φ22.6×10.5×12.5 |
0.31 |
5 |
50000-120000 |
85000 |
62 |
15 |
|
SW-CM211510 |
Φ21×15×10 |
Φ23.5×13.1×12.3 |
0.23 |
5.7 |
50000-120000 |
85000 |
43.5 |
9.2 |
|
SW-CM252065 |
Φ25×20×6.5 |
Φ26.8×18.7×7.9 |
0.12 |
7.1 |
50000-120000 |
80000 |
17.1 |
3.8 |
|
SW-CM252010 |
Φ25×20×10 |
Φ28×17.2×13.2 |
0.2 |
7.1 |
50000-120000 |
80000 |
28 |
7.2 |
|
SW-CM251610 |
Φ25×16×10 |
Φ28×14×13.1 |
0.35 |
6.4 |
50000-120000 |
90000 |
67 |
15 |
|
SW-CM261610 |
Φ26×16×10 |
Φ28.3×14×12.8 |
0.39 |
6.6 |
50000-120000 |
90000 |
57 |
14 |
|
SW-CM302010 |
Φ30×20×10 |
Φ33.2×17.8×13.3 |
0.39 |
7.9 |
50000-120000 |
90000 |
60 |
14 |
|
SW-CM302015 |
Φ30×20×15 |
Φ33.6×17.8×17.2 |
0.59 |
7.9 |
50000-120000 |
96000 |
88 |
20 |
|
SW-CM322010 |
Φ32×20×10 |
Φ34.4×18.1×13 |
0.47 |
8.2 |
50000-120000 |
95000 |
57 |
14 |
|
SW-CM402515 |
Φ40×25×15 |
Φ44.5×21.8×18.8 |
0.88 |
10.2 |
50000-120000 |
94000 |
99 |
23 |
|
SW-CM403215 |
Φ40×32×15 |
Φ44.5×29×19 |
0.47 |
11.3 |
50000-120000 |
90000 |
48 |
11 |
|
SW-CM453015 |
Φ45×30×15 |
Φ48.3×26.4×18.2 |
0.88 |
11.8 |
50000-120000 |
95000 |
87 |
20 |
|
SW-CM503215 |
Φ50×32×15 |
Φ53.8×28.5×18.2 |
1.4 |
12.9 |
50000-120000 |
90000 |
100 |
27 |
|
SW-CM504020 |
Φ50×40×20 |
Φ53.6×37×23.2 |
0.78 |
14.1 |
50000-120000 |
80000 |
45 |
14 |
|
SW-CM635025 |
Φ63×50×25 |
Φ69×46×29 |
1.27 |
17.7 |
50000-120000 |
90000 |
59 |
18 |
|
SW-CM644020 |
Φ64×40×20 |
Φ68.2×37×23.5 |
1.87 |
16.3 |
50000-120000 |
90000 |
115 |
29 |
|
SW-CM805020 |
Φ80×50×20 |
Φ83.8×46.6×24.8 |
2.34 |
20.4 |
50000-120000 |
95000 |
94 |
28 |
|
SW-CM906020 |
Φ90×60×20 |
Φ95.4×55×24.5 |
2.34 |
23.6 |
50000-120000 |
90000 |
90 |
25 |
|
SW-CM1027625 |
Φ102×76×25 |
Φ107×70.3×29.7 |
2.54 |
27.9 |
50000-120000 |
95000 |
91 |
22 |
Note: The above table only lists some products. The specification and performance of nanocrystalline core can be customized according to customer's requirements. Please contact us for details.
Hot Tags: nano-crystalline common mode choke core, China nano-crystalline common mode choke core manufacturers, suppliers, factory, o type transformer, nanocrystalline iron core, Pulse Power Cores, magnetic cores for current transformers, nanocrystalline CMC core, power transformer toroidal core
Send Inquiry










